By Leticia Jensen


Smart phone maintenance and correction is hard putting in mind that most are key less hence only use screens that are super sensitive to touch. Mishandling of such phones contributes to their breakdown in most cases. Maximum care needs to be put since their parts are delicate. The iphone repair auckland offers is vital.

However, before going through a maintenance program, various things ought to be done by the owner. One needs to back up all the data in the smart phone so as to avoid loss of data. Back up in a computer, by browsing through the iTunes and finally clicking Sync.

Get all tools necessary for the maintenance program. A complete maintenance kit is vital, as one will get all tools, of the required sizes and use. Inspect the kit to make sure that items like screw drivers, dryers, tweezers and necessary replacement parts are there. Tools ought to be of good quality, since most smart phone parts are small and delicate hence need for maximum care.

Smart phones are joined using tiny screws on the bottom part next to the USB port. Unscrew both screws next to the port and place them in the working table. Inspect for the flap connections usually on the top corner on the right. The screen is handled by the flaps. Using a wedging tool, carefully lift the flaps with utmost care.

Stickers are also used to hold the second flap. The person doing this should also detach the black clamp normally located next to its screen from its third connection. After lifting it, make sure that the screen is detached carefully from the other parts of the phone. You may be required to exert some more pressure as you detach from its screen.

Unscrew the rest of the screws. In most cases, they will be six located on the flaps, sides and the last one on the top right. A black tape is used to cover the screws from exposure hence use a sharp razor blade to remove it from each screw head. Carefully, detach the glass screen from the LCD screen. Slide the LCD glass towards the home button to clear the top flanges, apply some little force on the metal piece if need be.

Totally free the LCD screen taking your time to clean the glass that is broken. Take care not to damage the plastic casing since it will be reused. Clear off tiny bits of glass using a dryer using controlled heat so as not to damage the plastic part. Use some surgical spirit to dissolve the adhesive that tightly attaches plastic parts.

Get the new screen. Apply the super glue carefully and not close to the Home button and the ear piece. Give the glue time to set for a while and afterwards attach the LCD screen back. Make sure the clamps slide in to shape and nicely. Attach the six screws, reinserting the cable into its black clamp. Connect all cables to their connectors and put the screen back to the phone making sure it fits nicely. Insert back the USB screws to place.




About the Author:



0 commentaires:

Enregistrer un commentaire

 
Network Marketing Secrets You May Not Know © 2013. All Rights Reserved. Powered by Blogger
Top