By Larry Morgan


One very common problems of air conditioning is operating it improperly. When using it, make sure that you close the doors and windows of the room. Other problems include the installation, poor services for the procedures, and poor maintenance. Installing it improperly may result to leaks in the ducts and low airflow. If during the installation, the refrigerant is not being charged, it will result to impaired efficiency and performance.

Most air conditioner products of manufacturers are being produced in a high quality standard. So if ever there is a problem, you must check the fuses and circuits. And before resetting breakers, cool down the unit first for 5 minutes. If the unit stops automatically, maybe the high pressure limit switch may have slipped, so if this happens, press the reset button. If there might be problems that are difficult for you to handle, follow these simple air conditioning service Las Vegas.

Leaks in the refrigerant is another common problem. Leaks occur when refrigerants are not charged properly during the installation. If leak happens, call a technician and let him fix it. The technician must do a repair test and charge it again with right amount. A refrigerant must also be checked whether it matches the manufacturers specifications. If it matches, it would perform more efficiently.

Another problem is failure in controlling the electric system. Deterioration of the compressors and fans mostly happen. And this happens when frequent turning off and on is being done. The wires and the terminals may also be deteriorated, so a professional technician must check it as well.

A thermostat sensor can be found at the back of the control panel. The sensor would measure the air temperature, and if it deprecates from its position, the air will behave irregularly. The sensor should be positioned near the evaporative coil. The drainage should also be checked and make sure that there are no clogs.

In order to maintain the system by yourself, you can check the filters and the coils if it is already dirty or not. Dirty filters and coils can make improper functionalities to the fans, compressors, and as well as the whole system. That is why, filters and coils must be maintained constantly to prevent ineffective and inefficient functionalities of the system.

Filters that are dirty will block the flow of air. Filters have a variety of types. Some are reusable while some must be replaced. Filters must be cleaned every one or two months. If the air conditioner is being used constantly, filters may need frequent attention.

Evaporator and condenser are two types of coils and these are two important parts that needs to be maintained. These must be always maintained as well. It collects dust easily and it may affect the airflow. Condenser coils in outdoors gets the dirt easily because of the foliages and the dusts from the environment.

Coil fins are not stiff, which means that it bents easily. And if it bents, it will block the flow of air. The seals which are placed between window frames and air conditioners must be checked if it is still close or still sticks to the metal case of system. It can be damaged during cool season due to moisture.




About the Author:



0 commentaires:

Enregistrer un commentaire

 
Network Marketing Secrets You May Not Know © 2013. All Rights Reserved. Powered by Blogger
Top