Before, the only way to protect metal fixtures against environmental effects was by painting them. That was pretty effective until the paint chipped and oxidation happened anyway. Now, there are ways to treat the metal so that it is resistant to corrosion. However effective this is, oxidation still finds a way. Then one has to employ creative solutions to get rid of it. Eco friendly rust remover is an alternative to the toxin-filled solutions used traditionally. When it is time to scrub, just ensure to stay away from those products that leave scratches.
Most of the solutions can be created from regular readily available items. Take salt and lime juice for example. Limes are used in all sorts of recipes. Salt is a must in every home. Use both together and the result makes for a potent cleaning agent. Salt the affected area. Soak with the lime juice. Let it rest for a bit. Use the lime to rub away the scum.
Citric acid is a very potent cleaning agent. Lemons can also be used. Fresh lemons will come in handy. Especially if the corrosion is not too extensive. It will clear things right up. Just cut the lemon in half then rub at the area until it is clear. One can also use lemon juice and a toothbrush. Note, use an old toothbrush or one that will not be used again.
Remember that aggressive rubbing can leave scratches on the surface. Aluminum foil is, therefore, a pretty good scrubber. Hard enough to leave it clean. So soft that it does not leave scratches. That is if one is careful not to let the foil develop sharp edges.
Use of aluminum foil does not limit the use of vinegar. One can also use a toothbrush or a piece of cloth. If the fixtures can be removed or are small enough to soak then soak them overnight in the vinegar. The corrosion will have cleared by morning. If the corrosion is extensive one should use distilled white vinegar. This is different from other types as it is a lab-produced cocktail of acetic acid and water. For less potency, just add some water.
Baking soda is another common kitchen ingredient. Just like vinegar, it makes for a very potent cleaning agent. Practically applicable in all sorts of cleaning situations. Cover the affected area with baking soda. Do not use it sparingly. Ensure proper coverage. Wet it with water or vinegar. Do not be afraid of the bubbles if vinegar is used. This is just a normal reaction between bicarbonate and acetic acid in the vinegar. Then scrub.
Potatoes have oxalic acid. Oxalic acid breaks down the corrosion making it easier to clear. Cut a potato in half and dip the cut end in dish soap. One can also dip in baking soda. Then, rub the affected area clean with that same end. It will carry quite a bit of gunk. Do not continue, cut off that dirtied piece and repeat the process until all is clean.
In some cases, the damage will be too extensive. It will seem like these solutions take too much time and effort to show any kind of change. In that case, seek professional help. A professional service will have more potent and effective ways.
Most of the solutions can be created from regular readily available items. Take salt and lime juice for example. Limes are used in all sorts of recipes. Salt is a must in every home. Use both together and the result makes for a potent cleaning agent. Salt the affected area. Soak with the lime juice. Let it rest for a bit. Use the lime to rub away the scum.
Citric acid is a very potent cleaning agent. Lemons can also be used. Fresh lemons will come in handy. Especially if the corrosion is not too extensive. It will clear things right up. Just cut the lemon in half then rub at the area until it is clear. One can also use lemon juice and a toothbrush. Note, use an old toothbrush or one that will not be used again.
Remember that aggressive rubbing can leave scratches on the surface. Aluminum foil is, therefore, a pretty good scrubber. Hard enough to leave it clean. So soft that it does not leave scratches. That is if one is careful not to let the foil develop sharp edges.
Use of aluminum foil does not limit the use of vinegar. One can also use a toothbrush or a piece of cloth. If the fixtures can be removed or are small enough to soak then soak them overnight in the vinegar. The corrosion will have cleared by morning. If the corrosion is extensive one should use distilled white vinegar. This is different from other types as it is a lab-produced cocktail of acetic acid and water. For less potency, just add some water.
Baking soda is another common kitchen ingredient. Just like vinegar, it makes for a very potent cleaning agent. Practically applicable in all sorts of cleaning situations. Cover the affected area with baking soda. Do not use it sparingly. Ensure proper coverage. Wet it with water or vinegar. Do not be afraid of the bubbles if vinegar is used. This is just a normal reaction between bicarbonate and acetic acid in the vinegar. Then scrub.
Potatoes have oxalic acid. Oxalic acid breaks down the corrosion making it easier to clear. Cut a potato in half and dip the cut end in dish soap. One can also dip in baking soda. Then, rub the affected area clean with that same end. It will carry quite a bit of gunk. Do not continue, cut off that dirtied piece and repeat the process until all is clean.
In some cases, the damage will be too extensive. It will seem like these solutions take too much time and effort to show any kind of change. In that case, seek professional help. A professional service will have more potent and effective ways.
About the Author:
Discover the best eco friendly rust remover for your projects by visiting our official website now. To check out our client testimonials or to place your order online, click the links at http://www.quick-glo.com today.
0 commentaires:
Enregistrer un commentaire